Manufacturing Process and Characteristics of Titanium Plates

Manufacturing Process and Characteristics of Titanium Plates

Characteristics of Titanium Plates

1、Surface Oxidation Film: The oxide film on the surface of titanium plates acts as a durable and effective separating agent, reducing the need for additional separating agents. This makes it easier to strip the plate and eliminates the need for pretreatment. Titanium plates are also half as heavy as copper plates.

2、Longevity: The lifespan of titanium plates is more than three times that of copper plates, ranging from 10 to 20 years depending on operating conditions.

3、Quality of Electrolytic Copper: Electrolytic copper produced using titanium plates has a dense crystalline structure, smooth and flat surfaces, and superior quality.

4、Pollution Prevention: Since titanium plates do not require a separating agent, they prevent contamination of the copper electrolyte.

5、Economic Efficiency: The use of titanium plates increases production capacity and reduces the cost of producing electrolytic copper, resulting in significant economic benefits.


Manufacturing Process of Titanium Plates

1、Hot Forging: This is a forging process conducted above the metal's recrystallization temperature.

2、Hot Rolling: Rolling is performed above the recrystallization temperature of the metal.

3、Cold Rolling: This is a rolling process conducted at a plastic deformation temperature below the recovery temperature.

4、Annealing: This is a heat treatment process where the metal is slowly heated to a specific temperature, held for a sufficient time, and then cooled at an appropriate rate (usually slowly, though sometimes controlled cooling is used).

5、Pickling: This process involves immersing the workpiece in an aqueous solution of sulfuric acid or similar acids to remove oxide films from the metal surface. It serves as a pretreatment or intermediate treatment for processes such as electroplating, enameling, and rolling.


Baoji Yesheng Titanium Industry Co., Ltd. is a high-tech company that integrates the production, processing, and sales of titanium and titanium alloys, nickel, zirconium, and other non-ferrous elements. It is situated in China's "Titanium Valley"-Baoji.Plates, bars, wires, tubes, standard components, forgings, equipment, and titanium and titanium alloys are the primary products. Nickel, zirconium, and alloys are also important.Welcome your consultation.


Browse Yesheng Titanium Products

Thank you for your
attention on Yesheng !

If you are interested in our titanium product, please fill in this form, we will reply you as soon as possible.

More Titanium News

  • 15
    Unraveling the Titanium Ingot Process
    The Birth of Titanium: Extracting the Raw MaterialTitanium, a versatile and sought-after metal, begins its journey from the depths of the Earth. The primary source of titanium is mineral sands, where ...